3 Leg Metal End Frame Fitting - 2-3/8th OD
Steel Metal Swing Set Hardware
You will need (2) End Frame Fittings to build your own metal swingset. These are heavy duty three-legged End Frame Fittings for two 2 3/8in metal pipe legs and a 2 3/8in metal pipe top-rail. One fitting fits at each end of the swingset. One Metal End Frame Fitting will work at either the right or the left end. You will need schedule forty 2in pipe for your swingset. National Test Lab Results: 5000 lbs. Commercial Grade. These fittings include all the hardware required to attach to the 4 pipes.
Pipe Leg Lengths Needed for Different Swing Beam Heights
(Leaves approximately 2ft of pipe in the ground)
|Beam Height||Middle Leg Length||OuterLeg Length|
|9ft High||11.74 ft.||11.74 ft.|
|10ft High||12.82 ft.||12.82 ft.|
|11ft High||13.71 ft.||13.91 ft.|
|12ft High||14.77 ft.||14.99 ft.|
Each 2 swing position beam should be at least 9ft in width. Schedule 40, 2 Inch pipe is recommended. Schedule 40, 2" pipe is 2" inside diameter and 2-3/8" outside diameter.
The price below is for 1 end frame fitting. You normally need (2) End Frame Fittings for (1) free standing metal swing set. (one for each side)Please make sure to choose the color you are interested in!
Last Updated: 02/24/2023 12:50 AM - ID:2832