Metal End Frame Fitting - 2-3/8th OD

Metal End Frame Fitting - 2-3/8th OD

Steel Metal Swing Set Hardware

To build your own metal swingset, you will need two End Frame Fittings. These are heavy duty two-legged end Frame fittings for two 2-3/8" od Metal pipe legs and a 2-3/8" od Metal pipe top-rail. One fitting fits at each end of the swingset. One Metal end Frame fitting will work at either the right or the left end. You will need schedule forty 2" pipe for your swingset. National test lab results: 5000 lbs. Grade: Commercial. These fittings include all the hardware required to attach to the three pipes, one being the swing beam, and two being the legs.

Pipe Leg Lengths Needed for Different Swing Beam Heights
(Leaves approximately 2ft of pipe in the ground)
Beam Height Leg Length Needed
8ft High 11ft 6in
9ft High 12ft 8in
10ft High 13ft 10in
11ft High 15ft
12ft High 16ft 2in

Each 2 swing positions beam should be at least 9ft in width. Schedule 40, 2" pipe is recommended. Schedule 40, 2" pipe is 2" inside diameter and 2-3/8" outside diameter.

The price below is for 1 end frame fitting, Please change quantity to 2 if you need more than that. You normally need two End Frame Fittings for a free standing metal swing set. (one for each side)

Features of Metal End Frame Fitting - 2-3/8th OD
  • Heavy Duty Set Screws to securely hold pipe in place.
  • Requires Schedule 40, 2 Inch pipe
  • 1/4" Thick Welded Steel Construction
  • Powder Coated in Blue or Green

  • Metal End Frame Fitting - 2-3/8th OD - ID#:JSP-EFF-2A
    Mfg'd By: Jensen Swing Products Inc.  SKU#:EFF-2A
    Regular Price: $259.99
    Sales Price: $169.95
    You Save $90.04 or 34.63%

    Availability: Usually ships in about 1-2 weeks.

    Last Updated: 03/01/2024 12:55 PM - ID:630