Equilateral Triangle Shade Sail 12 ft

Sunbrella Shade Sails provide protection from the Sun & Rain.

Sunbrella Equilateral Triangle Shade Sails feature Sunbrella breathable fabric to keep you cooler and more comfortable in hot weather. These sails provide a UV protection factor of up to 98% and can be mounted to a variety of surfaces and are easy to install. Use a shade sail to create a shaded area anywhere around your home or office. This state of the art material is unaffected by moisture and natural temperature extremes. Sunbrella fabric is fade and water resistant. The near waterproof fabric also resists stains, mildew and rot. The perimeter of each sail contains seatbelt type webbing for increased strength & durability and is designed with a gentle cantenary curve inwards towards the center of the sail to control the fabric tension. Each corner has a welded solid marine grade, stainless steel attachment ring to aid in attaching to a structurally sound fixing point. Shade sails, when installed properly, do not sag or flap in the wind. Sunbrella fabric has a 10 year manufacturers warranty. Thread, webbing and corner rings have a one year warranty.

All measurements are approximate and state the distance from the tip of one D-ring to the tip of the next D-ring along each side in a straight line assuming correctly installed and proper tension has been applied. Due to the limited available Sunbrella fabric widths, there will be seams approximately every 40-57 inches.

Note: Recommended attachment points should be at least 10% longer than the side of the shade sail to allow for attachment hardware and to allow for proper tensioning. IE: If the distance of the side of the shade sail is 10 feet, then the attachment points for this side of the shade sail should be at least 11 feet apart.

Custom sizes are available.

Sunbrella fabric is water resistant and Shade Sails made from this fabric have to be installed at a 20 degree slope to allow water to run off and not pool on top of the sail. Below is a chart with measurements based on the size of the sail for the amount of vertical drop from one attachment point of the sail to the opposite attachment point of the sail to allow water run off. Measurements are rounded.

Shade Sail Size
4 Feet
5 Feet
6 Feet
7 Feet
8 Feet
9 Feet
10 Feet
11 Feet
12 Feet
13 Feet
14 Feet
Amount of Drop
1 Foot 6 Inches
1 Foot 9 Inches
2 Foot 3 Inches
2 Foot 7 Inches
2 Foot 11 Inches
3 Foot 3 Inches
3 Foot 7 Inches
4 Foot 0 Inches
4 Foot 4 Inches
4 Foot 8 Inches
5 Foot 0 Inches
Shade Sail Size
15 Feet
16 Feet
17 Feet
18 Feet
19 Feet
20 Feet
21 Feet
22 Feet
23 Feet
24 Feet
25 Feet
Amount of Drop
5 Foot 4 Inches
5 Foot 8 Inches
6 Foot 0 Inches
6 Foot 4 Inches
6 Foot 8 Inches
7 Foot 0 Inches
7 Foot 5 Inches
7 Foot 10 Inches
8 Foot 3 Inches
8 Foot 10 Inches
9 Foot 4 Inches

Below are the fabric color choices for our Sunbrella Stock Size Shade Sails

Click on the images below for a detail view of the color.

Please note: Hardware is not included with the sail. If you would like to purchase the hardware pack it is available at the bottom of this page.

  • Side A = 12 feet (144 inches)
  • Side B = 12 feet (144 inches)
  • Side C = 12 feet (144 inches)
  • Made of SunBrella Marine Grade Awning Fabric.
  • Stainless Steel D rings in each corner.
  • 1.5 inch Heavy Duty Webbing sewn into Perimeter ~ 1000lbs / linear foot.
  • Near Water Resistant
  • 10 year fabric warranty

  • This item has been discontinued. We apologize for any inconvenience.

    Mounting Hardware Pack - Triangle Shade Sail

    Mounting Hardware Pack - Triangle Shade Sail
    Price: $43.99
    Sale Price: $34.95

    Last Updated: 02/09/2018 01:50 PM - ID:1497