Custom Sandbox Covers

Swingset Accessories

Looking for a custom sandbox cover/tarp to fit your existing swing set or fort's Sandbox? BackyardCity.com can make your sandbox cover to nearly any size that you may need. Only the best materials are used to make these covers, including 15 oz marine grade vinyl along with the reinforced cut-outs as you can see in the picture on the right side of this text.  Your choice of stainless steel snaps or grommets that are pre-sewn into the tarp for easy attachment are also shown in these pictures.  Or you can opt for no fasteners.

Custom Sandbox Covers usually take 10 to 14 business days to ship and 3-9 days more to be delivered. Please make sure you supply accurate outside edge to outside edge dimensions of the sandbox. Measurements will be accurate to within 1 inch.   

Solid Vinyl

Vinyl Mesh

---

Sandbox Cover Example: Suppose you have a 60"x72" sandbox (measured outside edge to outside edge) with 4x4 posts in each corner and you want it to drop down the outside of the sandbox wall 3 inches:  The finished cover will be 66" x 78" with 8-1/2" square cutouts on each corner.   The 8-1/2" cutout is enough to accommodate the 3" drop,  1-1/2" for the sandbox wall which is usually made of a 2x? piece of wood (We will need the width of the supporting boards)and 4" for the post.   We know that a 4"x4" post is actually 3.5"x3.5", but the extra 1/2" gives you a little wiggle room.

NO ORDER WILL BE PROCESSED
WITHOUT THIS COMPLETED FORM EVEN IF THE ORDER IS PLACED ON LINE.
Fill out and fax completed form to
901-531-8145.

This form is required in addition to the online form below

All custom sandbox covers are made to your specifications.   Therefore all sales are final.   No refunds or returns can, or will, be accepted.

Check out our Standard Sized Mesh Sandbox Covers if you have a 4x4, 5x5 or 6x6 Square Sandbox with 4 x 4 Corner Posts..