3 Leg Metal End Frame Fitting

Steel Metal Swing Set

You will need (2) End Frame Fittings to build your own metal swingset. These are heavy duty three-legged End Frame Fittings for two 2 3/8� metal pipe legs and a 2 3/8� metal pipe top-rail. One fitting fits at each end of the swingset. One Metal End Frame Fitting will work at either the right or the left end. You will need schedule forty 2" pipe for your swingset. National Test Lab Results: 5000 lbs. Commercial Grade. These fittings include all the hardware required to attach to the 4 pipes.

Pipe Leg Lengths Needed for Different Swing Beam Heights
(Leaves approximately 2ft of pipe in the ground)

8ft High Beam

9ft High Beam

10ft High Beam

11ft High Beam

12ft High Beam

Side Leg Length

10.66 ft.

11.74 ft.

12.82 ft.

13.91 ft.

14.99 ft.

Center Leg Length

10.66 ft.

11.74 ft.

12.82 ft.

13.71 ft.

14.77 ft.

Each 2 swing position beam should be at least 9ft in width. Schedule 40, 2 Inch pipe is recommended. Schedule 40, 2" pipe is 2" inside diameter and 2-3/8" outside diameter.

The price below is for 1 end frame fitting. You normally need (2) End Frame Fittings for (1) free standing metal swing set. (one for each side)

Please make sure to choose the color you are interested in!

Features:

Heavy Duty Set Screws to securely hold pipe in place.

Requires Schedule 40, 2 Inch pipe

1/4" Thick Welded Steel Construction

Powder Coated in Red and Green Only

Swingsets - Metal Middle Frame Fitting
Price: $125.99
Sale Price: $110.26