Custom Sandbox Covers - Poured Rubber Vinyl

18 oz Poured Rubber Vinyl

New and improved 18oz poured rubber vinyl custom sandbox cover/tarp to fit your existing swing set or fort sandbox! BackyardCity.com can make your sandbox cover to nearly any size that you may need. Only the best materials are used to make these covers, including 18 oz Poured Rubber vinyl along with the reinforced cut-outs as you can see in the picture on the right side of this text. 

Your choice of stainless steel snaps or grommets that are pre-sewn into the tarp for easy attachment are also shown in these pictures.  Or you can opt for no fasteners.

Available 18oz Poured Rubber Colors
(Click to Enlarge)

Custom Sandbox Covers usually take 10 to 14 business days to ship and 3-9 days more to be delivered. Please make sure you supply accurate outside edge to outside edge dimensions of the sandbox. Measurements will be accurate to within 1 inch.   

Sandbox Cover Example - Suppose you have a 60"x72" sandbox (measured outside edge to outside edge) with 4x4 posts in each corner and you want it to drop down the outside of the sandbox wall 3 inches:  The finished cover will be 66" x 78" with 8-1/2" square cutouts on each corner.   The 8-1/2" cutout is enough to accommodate the 3" drop,  1-1/2" for the sandbox wall which is usually made of a 2x? piece of wood (We will need the width of the supporting boards) and 4" for the post.   We know that a 4"x4" post is actually 3.5"x3.5", but the extra 1/2" gives you a little wiggle room.

Check out our Standard Sized Mesh Sandbox Covers if you have a 4x4, 5x5 or 6x6 Square Sandbox.

(Click on the link to print form) All Custom Sandbox Cover orders or quotes must complete this measuring form. NO ORDER WILL BE PROCESSED WITHOUT THIS FORM COMPLETED. Faxes should be sent to 901-531-8145.

All custom sandbox covers are made to your specifications.   Therefore all sales are final.   No refunds or returns can, or will, be accepted.