Glider Mounting System
for mounting a Back to Back Glider to a wooden swing beam
If you have a single swing beam, choose our 4 point glider mounting system. A 4 point glider mounting system allows the glider to "Glide" when going back and forth as was the intent for a back to back glider. Optional mounting hardware to attach to a 4" x 4" or 4" x 6" swing beam. Optional Swing hangers and spring clips can also be purchased for easy mounting
Optional Mounting Equipment:
- 4 x 4 Mounting hardware includes four (4) 2.5 inch Swing Hangers, Three (3) 3.5 inch carriage bolts, nuts & washers
- 4 x 6 Mounting hardware includes four (4) 2.5 inch Swing Hangers, Two (3) 3.5 inch carriage bolts, One (1) 5.5 inch carriage bolt , nuts & washers
- Four (4) Spring clips to quickly attach the 4 chains (or ropes) of the Back to Back Glider to the four swing hangers on the ends of this Glider Mount.
- Recommended Weight Limit is 1,800lbs.
Can't find what you are
looking for? Us,
or you can call us Toll Free: 888-685-9251
|
Hours of Operations |
|---|
|
August-Feb: 9am-5pm Weekdays.
Closed Weekends |
|
|
| © Copyright 2001-2007 by
BackyardCity.com. All Rights Reserved. Site maintained by VIMATA Interactive Corp. |
Search Engine Optimization Services & Internet Marketing - CommerceFriends.com
Images Disclaimer: We have made a concerted effort to provide images that accurately represent the actual color, style, size & shape of each product. However, due to all the possible variants, including but not limited to: light source, monitor quality or settings, etc.; we can not guarantee that these images represent the actual colors of the product. Returns due to color discrepancies will be considered a return of a non-defective item as detailed in our Legal Policies.
|
|
|
Related Terms: hardware, back to back glider, swing set hardware, 4 point mounting system, mounting system, Swing Set Glider, rocket rider
